Install Software On Windows - Oki CX2033 MFP Guia De Instalacion

Install Software on
Windows
Installing the Drivers _______
Installing the Printer Driver on a
Network
Print the MenuMap
1. Press the Menu button on the scanner control
panel.
2. Use the UP/DOWN arrow keys to navigate to the
Report Print menu.
3. Press OK.
4. Press OK again to print the MenuMap.
5. Press the Return key
to exit the menu.
Keep these sheets handy: they contain information
you need to set up the printer on your network.
Install the Driver
1. Insert the Printer Software CD in the CD-ROM
drive. The CD will autorun.
2. Select your language.
3. If you accept the license agreement, select I
Accept.
4. Select the Driver Setup tab then click Install
Driver.
5. Select network printer.
6. Select Directly to the network using TCP/IP.
7. Enter the IP address (locate the address on the
Menu Map in the Network Menu) or select
Search Address to locate the printer on the
network.
8. Follow the on-screen instructions.
Installing the Driver on a USB or Parallel
Setup
1. Insert the Printer Software CD in the CD-ROM
drive. The CD will autorun.
2. Select your language.
3. If you accept the license agreement, select I
Agree.
4. Select the Driver Setup tab then click Install
Driver.
5. Select Local Printer.
6. Select the Port: USB or LPT1.
7. Select your printer model.
8. Follow the on-screen instructions.
Test the Printer Driver Installation
To make sure the printer driver is correctly
installed, print a test page:
1. On the Windows taskbar click Start >Settings
>Printers.
2. Right-click your printer model then click
Properties.
3. Click the Print Test Page button. Reinstall the
driver if the installation failed.
Install the Twain Driver
This driver is used to initiate a scan from your PC
via software. The driver can be installed two ways:
• Download it from the Oki website
http:\\my.okidata.com, or
• Use the New Hardware found Wizard to install
Driver/Twain/7351SS.inf to your hard drive from
the Printer Software CD.
Fax Setup ________________
Your MFP has to be set up properly to allow faxing.
The following parameters must be set before using
the fax function:
• Date and time
• Country code
• station ID and number
See "Setting the FAX Facility" in the User's Guide on
the Printer Software CD.
8 • English