Cleaning And Maintenance - OPED VACOpedes Diabetic WM-TEDP-20-4-1 Manual De Instrucciones

Fuente: oped.de
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
English
VACOpedes Diabetic
Fitting and changing the sole
Removing the sole
Push both unlocking buttons simultaneously
Fitting the sole
Position the VACOpedes Diabetic straight and centred on the sole before pushing it against
the sole (you will hear two clicks)
(Figure
Adjusting the sole length
Remove the sole (see Removing the sole) and push the unlocking button. Pull the toe section
to the desired length
(Figure
17).
Patient information
Pressure points / problem-solving
Remove the orthosis from your foot. Pull the valve ring to allow air to flow into the cushion.
Spread the cushion filling evenly at the pressure point. Re-fit the orthosis (see How to
use). Using a finger, check that there are enough small spheres in the cushion between the
pressure point and the outer lower shell.
Showering / washing
You can shower / enter water with the product if your doctor has given you permission to do
so.
Sleeping
Before you go to sleep, place a towel, such as a hand towel, underneath the device so that
the bed sheets are not damaged.
Indications
• Ulcerations on the foot
• Diabetic foot wounds
• Post-operative care following toe and forefoot amputations
12
(Figure
15).
16).
English
Contraindications
None known

Cleaning and maintenance

• Lower shell: Dishwasher at 60 °C
• Strap: Washing machine at 40° C
• PA velour covers: Wash with similar colours in a washing machine at 60°C.
Please remove the vacuum cushion before washing. Close the zip and Velcro fasteners
again.
• Vacuum cushion: Surface disinfection
Technical data / parameters
Materials used:
Hard lower shells (PP); Covers (cotton/PA velour/PU foam); Cushion sleeve (PVC); Filler material (EPS
spheres); Strap (PP fabric); Sole (EVA); Insole (PU); Upper shell (EVA/PP); Upper shell clasp (POM).
Note: Not made from natural rubber latex.
Transport conditions / storage conditions
Storage: Store in a dry and hygienic place and protect from direct sunlight.
Warranty
The warranty complies with statutory regulations. The terms and conditions of
business of OPED GmbH also apply, where permissible.
Data protection
Germany:
Information about the processing of your personal data can be
found under: http://oped.ch/kontakt/your-data/.
Switzerland: Information about the processing of your personal data can be
found under: http://oped.ch/kontakt/your-data/.
Your OPED Team
13
Tabla de contenido
loading

Tabla de contenido