Steren DIS-100 Manual De Instrucciones página 61

7.3 TC Printer Driver Set-Up
1. Enter the network environment and select the computer that is connected to the
board.
2. The "Generic / Text only"
3. Double-click on it and wait for the driver is installed.
7.4 Sending a message through the LAN
1. Start the software. Create your message.
2. Click on
click "OK".
3. Select the "Generic/Text only" printer from the printer name box and click on "OK".
28
for "Send via Network". Input the "Sign ID Number" and "Page Number",
7. LAN COMMUNICATION
4. Select the port that is connected to
the CR Board.
In this case it will be COM1 in the
section "Using existing port". Press
"Next"
5. "Manufacturer", search for "Generic"
and select "Generic/Text only". Click
"Next".
printer should show.