Performing Calibration - Epson BrightLink 455Wi+ Guía De Referencia Rápida

Performing Calibration

Two types of calibration are available:
■
Normal, which is faster and appropriate for most situations (25 calibration
points)
■
Advanced, which is recommended when you are projecting very detailed
images and need higher accuracy (49 calibration points)
You may need to recalibrate if you use a different computer, press the
or change the projector's aspect ratio using the remote control. You will need to
recalibrate if you change the following settings in the projector's menu system:
Auto Setup
.
Zoom
1. To start calibration, do one of the following:
Windows: click the
right corner of your screen), then select
(Advanced)
Mac OS X: click the
menu bar, then select
You see the following message:
2. After you read the message about calibration, click
14
Getting Started
, ,
Resolution Tracking
pen icon in the system tray on your taskbar (lower
.
Calibrate (Normal)
, ,
Sync Position
Calibrate (Normal)
pen icon in the Dock, select
or
, ,
Aspect Keystone
or
Calibrate
Calibrate (Advanced)
.
OK
button
Auto
, or
Calibrate
from the
.