Cleaning And Maintenance - Beurer HK 37 To Go Instrucciones De Uso

Bufanda tubular calentada con batería externa
Ocultar thumbs Ver también para HK 37 To Go:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Automatic switch-off time
This heat pad (1) is equipped with an automatic switch-off function. This turns off the heat supply approx.
110 minutes after the initial use. The On/Off button (2) on the heat pad and the white LED display on the
powerbank go out.
You can switch the heat pad on again immediately by pressing the On/Off button. If it is no longer possible
to switch the heat pad on, then the powerbank has been run down.

8. Cleaning and maintenance

IMPORTANT
• Before cleaning, always first disconnect the powerbank (4) from the heat pad (1). Remove the pow-
erbank from the heat pad's pocket. Otherwise there is a risk of damage.
IMPORTANT
• The powerbank (4) must never come into contact with water or other liquids as this may cause
damage.
To clean the powerbank (4), use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
IMPORTANT
• Please note that the heat pad (1) must not be chemically cleaned, wrung out, tumble dried, put
through a mangle or ironed. Otherwise the heat pad may be damaged.
This heat pad is machine-washable. To do this, place the connecting cable (3) into the built-in pocket (5)
and place the heat pad (1) in a wash bag. Set the washing machine to a particularly gentle wash cycle at
30°C (wool cycle).
For ecological reasons, always wash the heat pad (1) together with other textiles.
Use a delicate laundry detergent and measure it out according to the manufacturer's instructions.
IMPORTANT
• Please note that washing the heat pad (1) too frequently has a negative effect on the product.
The heat pad should therefore be washed in a washing machine a maximum of 10 times during its life.
Let the heat pad dry flat on a clothes horse.
IMPORTANT
• Do not use pegs or similar items to attach the heat pad (1) to the clothes horse, otherwise the
heat pad may be damaged.
• Only reconnect the heat pad to the powerbank (4) once the heat pad and the connector plug of
the connecting cable (3) are completely dry. Otherwise the powerbank and the heat pad could be
damaged.
Storage
If you do not plan to use the heat pad for a long period of time, we recommend that you store it flat and
spread out. Always remove the powerbank. Ensure there are no sharp folds in the heat pad at any time.
IMPORTANT
Please allow the heat pad (1) to cool down before storing, otherwise the heat pad may be damaged.
To avoid sharp folds in the heat pad, do not place any heavy objects on top of it while it is being stored.
18
Tabla de contenido
loading

Tabla de contenido