Parrot ASTEROID Mini Guía De Utilización Rápida página 19

clean the area with an appropriate
cleaning product before sticking the
support ;
once you have stuck the support on
the dashboard, wait for approximately
2 hours without handling it.
Remember to remove your screen when
leaving the vehicle to avoid tempting any
would-be thieves and
prolonged exposure to sunlight.
Installing the remote control
Stick the remote control support on your
dashboard. To do so, use the adhesive
tape located under the support.
To make sure the adhesive tape adheres
well :
clean the area with an appropriate
cleaning product before sticking the
support ;
once you have stuck the support on
the dashboard, wait for approximately
2 hours without handling it.
There are two ways to supply power to the
to prevent
remote control : with a battery or by
connecting it to the electronic box.
To supply power with a battery (diagram D
p.11) :
1. Remove the circular plastic part on
the back of the remote by turning it
clockwise.
2. Insert a 3V CR2032 battery into the
remote control. Make sure the
battery is correctly positioned.
3. Put the circular plastic part back by
turning it counterclockwise.
To connect the remote control to the
electronic box (diagram D p.11) :
1. Remove the circular plastic part on
the back of the remote by turning it
clockwise.
2. Connect the remote control cable
into the battery compartment and
turn it counterclockwise.
3. Connect the remote control cable to
the electronic box, next to the USB
connectors (diagram p.6).
English
19