Inner Lining - AGV HORIZON SKYLINE Manual De Instrucciones

3) INNER LINING

The crown pad, cheek pads and wind shield are removable and washable. To remove and install the internal
padding, follow the instructions and observe the figures below. To wash the internal padding, refer to the
"Safety Warning" booklet.
3.1) Cheek pad Removal/Installation
1
14
2.3) Nose guard Removal/Installation
The nose guard can be removed by gently extracting it from its hous-
ing. To refit it, insert the plastic bands into their housings and check
that it is secure.
Cap
Right cheek pad
Left cheek pad
Throat wind shield
2
To remove the cheek pads, grip
them at the front near the helmet
chin guard and pull in the direc-
tion of the arrow to release them
from all the press studs (1). Slide
the plastic band out of its hous-
ings and remove the cheek pads
(2).
To refit the cheek pads, slide them
into the helmet, and fasten the
press studs (3). Insert the plastic
band into its housings on the side
of the outer shell (4). Check that
the cheek pads are perfectly se-
cured to the helmet.