Precautions And Safety Measures; Safety Information - Amprobe AF-600 Manual De Usuario

1. PRECAUTIONS AND SAFETY MEASURES

SYMBOLS
�
Caution! Refer to the explanation in this manual.

WARNING HAZARDOUS VOLTAGE. Risk of electric shock.
Consult user documentation.
T
The equipment is protected by double insulation or reinforced insulation.
Battery.
M
Certified by CSA Group to North American safety standards.
®
� Complies with European Directives.
Conforms to relevant South Korean EMC Standards.
Conforms to relevant Australian standards.
This product complies with the WEEE Directive marking requirements. The affixed label indicates
that you must not discard this electrical/electronic product in domestic household waste. Product
=
Category: With reference to the equipment types in the WEEE Directive Annex I, this product is
classed as category 9 "Monitoring and Control Instrumentation" product. Do not dispose of this
product as unsorted municipal waste.

SAFETY INFORMATION

The product complies with:
• UL/IEC 61010-1, CAN/CSA C22.2 No. 61010-1, Pollution Degree 2
• EMC IEC 61326-1
CENELEC Directives
The instrument conforms to CENELEC Low-voltage directive 2014/35/EU and Electromagnetic compatibility
directive 2014/30/EU.
�Warnings: Read Before Using
To avoid the possibility of electric shock or personal injury:
• Use the Product only as specified in this manual or the protection provided by the instrument may be
compromised.
• Avoid working alone so assistance can be rendered.
• Test on a known signal source within the rated voltage range of the Product both before and after use to
ensure the Product is in good working conditions.
• Do not use the Product around explosive gas, vapor, or in damp or wet environments that exceed IP54
rating. This Product meets water and dust protection IP 54 per IEC 60529.
• Inspect the Product before use and do not use if it appears damaged. Check for cracks or missing plastic.
Pay particular attention to the insulation around the connectors.
• Inspect the earth spike and product body insulation (fiber glass and plastics) before use. Do not use if
insulation is damaged.
• A-Frame is to be used with UAT-600-T Transmitter. Check all safety information in UAT-600 User Manual before use.
• Do not use the Product if it operates incorrectly. Protection may be impaired. When in doubt, have the
Product serviced.
• Have the Product serviced only by qualified service personnel.
• Use extreme caution when working around bare conductors or bus bars. Contact with the conductor could
result in electric shock.
• Do not hold the Product beyond the tactile barrier.
2