Introduction; Operation - Amprobe AF-600 Manual De Usuario

• Remove the Product from measuring position before opening the Product case or battery cover.
• Never operate the Product with the battery cover removed or the case open.
• Use caution when working with voltages above 30 V AC RMS, 42 V AC peak, or 60 V DC. These voltages
pose a shock hazard.
• Do not attempt to connect to any circuit carrying voltage.
• To avoid false readings that can lead to electrical shock and/or injury, replace the batteries as soon as the
low battery indicator appears. Check Product operation on a known source before and after use.
• Use only 6 x AA batteries properly installed in the battery compartment, to power the Product
(see Section 7: BATTERY REPLACEMENT).
• When servicing, use only specified user serviceable replacement parts.
• Adhere to local and national safety codes. Individual protective equipment must be used to prevent shock
and arc blast injury where hazardous live conductors are exposed.
• For use by competent persons only.
• Remove the batteries if the Product is not used for an extended period of time, or if stored in temperatures above 140 °F (60 °C). If the batteries are not removed, battery leakage can damage the Product.
• Follow all battery care from the battery manufacturer.

2. INTRODUCTION

The AF-600 A-Frame cable ground fault finder is an
optional accessory specifically designed for the Amprobe
UAT-600 series. In combination with the Transmitter, it will
pinpoint the place where a cable metal conductor (either
a sheath or a metallic conductor of the wire) touches the
ground. It can also detect other conductors to ground
faults such as pipeline coating defects.

3. OPERATION

1
29
L H
2
1
On/off : Press for 2 seconds to turn on or
turn off the A-Frame.
2
Speaker Volume
between mute and three levels of volume.
3
: Press repeatedly to loop