Idiomas disponibles
Idiomas disponibles
1. Download the latest NeuLog WIFI firmware update
from the NeuLog website.
2. Install the NeuLog WIFI firmware updater.
3. Power your WIFI module by connecting a charged
BAT-200 or through connection to your computer
using the included USB to micro USB cable.
4. After a few moments when only the blue LED light
remains on – the wireless network (NeuLog1334 for
example) is being transmitted.
5. Open your computers wireless connection settings
and connect to the NeuLogXXXX wireless network.
Note: You may get a notification that you now have a
"limited" connection – this is OK as it simply means
you don't have access to the internet.
6. Open the WIFI firmware updater, titled "WIFI module
update" from your desktop (the file you downloaded
and installed in step 1).
7. A small window will open. Press Start. The updater
will run automatically and will take about five
minutes.
V2018.01
29
Home
English
