Idiomas disponibles
Idiomas disponibles
19
Home
Using the NeuLog WIFI module
The NeuLog WIFI module is a very advanced piece of
equipment; having capability to transmit its own wireless
network as well record data from up to 5 NeuLog
sensors at a time.
The NeuLog WIFI module can be powered by the
NeuLog battery module or by a USB power source.
It also can be used as a USB module when it is
connected to a PC or Mac and under local NeuLog
software.
You'll notice that on the front of the WIFI-201 module
there are four LED lights labeled A, C, T, and U.
A (Access Point): (blue LED) When the blue LED is the
only light on, the WIFI module is in Access Point mode
(described below) and is transmitting a closed wireless
network which you can connect devices to.
C (Client Mode): (green LED) When the green LED is the
only light on, the WIFI module is in Client Mode
(described below) and allows your wireless devices to
control sensors through the website
www.WiFi201.com
as well as browse the internet.
T: (Transmission): (red LED) The red LED will blink when
there is active communication between any connected
sensors and the computer or smart device.
V2018.01
English
