Idiomas disponibles
Idiomas disponibles
8. To change the experimental settings click the "Run
experiment" icon (experiment duration for example).
9. To run an experiment and collect data click "Record".
Client mode use
If you have a wireless network and wish to browse the
internet while using the NeuLog WIFI module; you can
use client mode to connect the WIFI module to your local
internet. By default the WIFI module starts in "Access
point mode" but can easily be changed to "Client mode".
Note: Before following this procedural guide you must
configure your WIFI module using the "Access Point
Mode" guide above. Access point mode is most
commonly used.
1. Configure your WIFI module as per the "Access point
mode" guide in this document.
2. Using your connected device, locate and click the
"Tools" icon on the top of the NeuLog web
application window in your browser.
3. Click on "WIFI options".
4. Input your local internet connection's name and
password in their respective text fields and click on
"Connect". This step attempts to connect the NeuLog
WIFI module directly to your local wireless network
allowing you to browse the internet.
V2018.01
23
Home
English
