Nostalgia PT300RETRORED Instrucciones Y Recetas página 9

Pelador y torcedor en espiral eléctrico al estilo de los 50
Idiomas disponibles

Idiomas disponibles

SPIRAL
1.
To prepare '50S-STYLE ELECTRIC SPRIAL TWISTER & PEELER, hold down
Clutch Release button and move Peeling Arm to end furthest from Fork
Mount. Be sure Peeling Arm Release is in the down position.
2.
Attach Cut Fork to Fork Mount by aligning notches on Cut Fork to grooves
on Fork Mount, then twisting the Cut Fork clockwise to secure.
3.
Follow section on "ATTACHING BLADES TO BLADE MOUNT"
on page 8 to attach Spiral Blade to Blade Mount.
4.
Press end of potato into center of Cut Fork.
5.
When ready to peel, slide the Power Button to Drive/ON and
the Spiral Blade will begin to spiral cut your potato.
6.
When done spiral cutting, slide the Power Button to Twist/OFF.
7.
Carefully remove remaining potato from Cut Fork and the spiraled
potato from '50S-STYLE ELECTRIC SPRIAL TWISTER & PEELER.
8.
Repeat steps 1-8 to spiral additional potatoes.
9.
When done using the '50S-STYLE ELECTRIC SPRIAL TWISTER & PEELER, detach the
Cut Fork by twisting counter-clockwise and pulling away from the Fork Mount.
SPIRAL ON A STICK
1.
To prepare '50S-STYLE ELECTRIC SPRIAL TWISTER & PEELER, hold down Clutch
Release button and move Peeling Arm to end furthest from Fork Mount. Be sure
Peeling Arm Release is in the down position.
2.
Attach Cut Fork to Fork Mount by aligning notches
on Cut Fork to grooves on Fork Mount, then
twisting the Cut Fork clockwise to secure.
3.
Follow section on "ATTACHING BLADES TO BLADE MOUNT"
on page 8 to attach Spiral Blade to Blade Mount.
4.
Next, carefully pierce center of potato, lengthwise, with
pointed end of Bamboo Skewer. Stop when pointed
end of Bamboo Skewer reaches end of the potato.
5.
Thread visible end of Bamboo Skewer through hole near top of Spiral Blade and notch
cutout on top of end panel. Center and press end of potato into center of Cut Fork.
6.
When ready to peel, slide the Power Button to Drive/ON and
the Spiral Blade will begin to spiral cut your potato.
7.
When done spiral cutting, slide the Power Button to Twist/OFF.
8.
Carefully remove potato from '50S-STYLE ELECTRIC SPRIAL TWISTER &
PEELER and evenly fan out potato spirals on Bamboo Skewer.
9.
Repeat steps 1-8 to spiral additional potatoes.
When done using the '50S-STYLE ELECTRIC SPRIAL TWISTER & PEELER, detach the Cut Fork
by twisting counter-clockwise and pulling away from the Fork Mount.
When finished using '50S-STYLE ELECTRIC SPRIAL TWISTER & PEELER, follow section on
"REMOVING BLADES FROM BLADE MOUNT" on page 8 to remove Blades from Blade Mount.
7
loading