Configure Ip Address And Date; Usb Connection - Promax TG-140 Manual De Instrucciones

4.3 Configure IP Address and date

To remote control the TG-140 it must be connected to a network and it must have
an IP address.
To configure the IP address of the TG140 go to General Configuration/IP
Config/Static IP Config/New IP. Set the IP of your choice. Now you will set the Gateway
address. Press Menu one time to go back. Do not press the Menu button two times or
you will loose the IP just filled. Then, set the Gateway address. If you have no Gateway
address fill it all with zeroes. Press menu only one time and to go to Apply IP Changes.
Press the Knob to apply the changes.
Alternatively you can use a dynamically assigned IP address. If your network has
a DHCP server and you want the TG-140 to take an address from it go to:
and press the Knob.
To set date and time in the equipment, access the menu:
Press the knob to move to the next field and turn it to change the number. Once
changes are done, select the Apply changes option to save them.
4.4

USB Connection

The TG-140 includes four USB ports to connect a USB flash memory. The USB
device is meant to import or export Transport Stream Files between the TG-140 and its.
To use the USB memory, plug it on the TG-140 port and will be automatically
recognized and ready to be used.
To copy files into the USB device could be done in two ways:
-
Using Copy File or Delete File menus, a Transports Streams files could be
transferred or deleted into the USB device.
Page 12
General Configuration/IP Config/DHCP
General Configuration/Date and Time
/Edit Time
/Edit Date
/Apply Changes
USER'S MANUAL. TG-140
02/2013