Operating Instruccions - Promax TG-140 Manual De Instrucciones

Grabador/reproductor de transport stream
Ocultar thumbs Ver también para TG-140:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

USER'S MANUAL. TG-140

3 OPERATING INSTRUCCIONS

[1] Display
[2] USB Ports
USB ports that are used to plug USB storage devices. Transports
Streams files can be played or saved in the USB flash memory.
[3] On/Off button: This is the red button on the front of the equipment. To turn on the
TG-140 just press and release the On/Off button. The TG-140 takes
about 1 minute to start up. If it takes more time it is probably due to
a check disk which happens every 30 starts or when recovering
from a bad shut down. You know the TG-140 is ready for operation
when the LCD screen does not display "Initializing...". To turn off
the TG-140 press and release the "On/Off" button. The TG-140 will
take less than one minute to completely power off. Pressing this
button more than four seconds and then releasing it will force an
emergency power off. The emergency power off should only be
used in case of emergency.
[4] Menu button: When you press the Menu button you go back one item the menus
hierarchy.
[5] Knob:
Pressing the Knob means "Execute" or "Ok" to go to the next level
of the Menu hierarchy. Moving the Knob left and right shows the
menus of the same hierarchy level.
02/2013
Figure 4.- Front panel TG-140.
Page 7

Capítulos

Tabla de contenido
loading

Tabla de contenido