CONTENTS | OPERATION
Important Instructions
OPERATION
1.
1.1
1.2
1.3
2.
Safety __________________________________________________________3
2.1
Intended use ______________________________________________________ 3
2.2
2.3
2.4
Test symbols ______________________________________________________ 3
3.
4.
5.
Settings _______________________________________________________4
6.
7.
Storage ________________________________________________________5
8.
INSTALLATION
9.
Safety __________________________________________________________5
9.1
9.2
10.
10.1
11.
Installation ____________________________________________________6
11.1
Wall mounting ____________________________________________________ 6
11.2
11.3
Power supply _____________________________________________________ 6
11.4
Wiring block ______________________________________________________ 7
12.
13.
Maintenance __________________________________________________7
14.
Specification __________________________________________________8
14.1
14.2
14.3
Data table _________________________________________________________ 9
14.4
14.5
15.
Warranty ____________________________________________________ 10
2
| CK 150-1 / 200-2 Trend
OPERATION
1. Important Instructions
When using electrical appliances, basic precautions should always
be followed to reduce the risk of fire, electric shock, and injury to
persons, including the following:
1 Read all instructions before installing or using this heater.
2 To reduce the risk of fire, do not store or use gasoline or
other flammable vapors and liquids in the vicinity of the
heater.
3 This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. Keep combustible materials,
such as furniture, pillows, bedding, papers, clothes, etc. and
curtains at least 3 feet (0.9 m) from the front of the heater
and keep them at least 3 feet (0.9 m) away from the sides and
rear.
4 Extreme caution is necessary when any heater is used by or
near children or invalids and whenever the heater is left op-
erating and unattended.
5 Do not operate any heater after it malfunctions. Disconnect
power at service panel and have heater inspected by a repu-
table electrician before reusing.
1.1
Document information
The chapter Operation is intended for both the user and qualified
contractors.
The chapter Installation is intended for qualified contractors.
NOTE:
Read these instructions carefully before using the
heater and retain them for future reference.
Pass on the instructions to a new user if required.
1.2
Safety instructions
1.2.1 Structure of safety instructions
KEYWORD: Type of risk
!
Here, possible consequences are listed that may result
from failure to observe the safety instructions.
Steps to prevent the risk are listed.
1.2.2 Symbols, type of risk
Symbol
Type of risk
Injury
!
Electrocution
Burns
(burns, scalding)
Fire
www.stiebel-eltron-usa.com