Comelit 8513HIM Manual Tecnico página 5

Warning
• Install the equipment by carefully following the instructions given by the manufacturer and in compliance with the standards in force.
• All the equipment must only be used for the purpose it was designed for. Comelit Group S.p.A. declines any responsibility for improper use of the apparatus, for any alterations made by
others for any reason or for the use of non-original accessories or materials.
• All the products comply with the requirements of Directive 2006/95/EC (which replaced Directive 73/23/EEC and subsequent amendments), as certified by the CE mark they carry.
• Do not insert objects or pour liquids into the device.
• Installation, mounting and assistance procedures for electrical devices must only be performed by specialised electricians.
• Cut off the power supply before carrying out any maintenance work.
This document may not be reproduced, even in part, without the express written consent of Comelit Group spa. The brands and commercial names appearing in this publication
remain the property of their respective owners.
For complete ViP system installation and wiring information, please refer to the relevant technical manual, which is also available from the website
www.comelitgroup.com.
KIT CONTENTS
Internal unit
ViP system power supply unit
Floor distributor
Apartment gateway
Ikall metal external unit (H264)
Power supply unit for external unit
RJ45 Ethernet cable
The "Comelit ViP Remote" application is available to download from Google play (for Android devices) and the App Store (for IOS devices).
WIRING DIAGRAMS
The IP address of gateway Art. 1456 and Art. 1456S is set to 192.168.1.200. For apartment gateway wiring configuration, please
refer to the Technical Manual for Art.1456 / 1456S.
DEFAULT: the ViP address of internal unit Art. 6602WK / 6602WK/BM is set to 00000001 "Master", the "self-ignition" function is
set by default to call the external unit with ViP address 00000100.
DEFAULT: the ViP address for external unit Art. 4894HIM is set to 00000100 and the button is pre-programmed to call the
apartment ViP address 00000001.
Guide to fitting a network cable for connecting the PC to Comelit switch Art. 1440 or between PC and POE output
The recommended cables are:
• UTP (Unshielded Twisted Pair): not protected from electromagnetic interference, maximum length 100 metres. We recommend the use
of a Panduit cable code NUL5C04BU-CE.
• STP (Shielded Twisted Pair): similar to the UTP but with a metal sheath.
The UTP and STP can fall into various categories. Category 5 (CAT 5) cables or greater must be used for the ViP system.
The tools required for fitting are as follows:
• 6-P 8-P crimping pliers.
We recommend using 8-pole Panduit pliers code MPT5-8A.
• 2 RJ45 connectors for each section of cable.
We recommend using Panduit connectors code MP588-L.
Art. 8513HIM Art. 8531
SINGLE-FAMILY KIT IKALL METAL
W/IKALL METAL AND AND ICONA KIT,
MASTER GATEWAY. GATEWAY WITHOUT
VIP H264 MASTER H264
Art. 6602WK
Art. 1441B Art. 1441B
Art. 1456 Art. 1456S
Art. 4894HIM Art. 4894HIM
Art. 1595 Art. 1595
see page 34 see page 35
Art. 8531/BM Art. 8521
IKALL METAL AND IKALL METAL AND
ICONA BM. KIT, ICONA KIT.VIP H264
GATEWAY WITHOUT SYSTEM
MASTER H264
Art. 6602WK/BM Art. 6602WK
Art. 1441B Art. 1441B
Art. 1440
Art. 1456S
Art. 4894HIM Art. 4894HIM
Art. 1595 Art. 1595
see page 35 see page 36
Port
Pin 1 Pin 8
Art. 8521/BM Art. 8522
IKALL METAL AND 2-FAMILY IKALL AND
ICONA BM. KIT.VIP VIP ICONA H264 KIT
H264 SYSTEM
Art. 6602WK/BM Art. 6602W (Qty 2)
Art. 1441B Art. 1441
Art. 1440 Art. 1440
Art. 4894HIM Art. 4682HC
Art. 1595 Art. 1595
Art. 1449
see page 36 see page 37
RJ45 PINS
Connector
Pin 8 Pin 1
5