After Use; Operations To Be Carried Out After Use; Emptying-Cleaning The Dirt Collection Container - POLTI EcoSteamVac DUAL Manual De Instrucciones

OPERATIONS TO BE CARRIED OUT AFTER USE

Always make sure that the appliance is unplugged before performing maintenance work of any kind.
♦ Switch off the appliance by pressing the main switch (1).
♦ Disconnect the plug from the electric outlet.
♦ Disconnect the monoblock plug (A6) from the appliance by pressing the button (A7) and by
pulling the plug to remove it from the appliance.

EMPTYING-CLEANING THE DIRT COLLECTION CONTAINER

One of the great advantages of EcoSteamVac is in fact the possibility of cleaning it, thereby avo-
ding all risk of spreading micro-organisms.
♦ Turn OFF the appliance.
♦ Disconnect it from the electric outlet.
♦ Empty the dirt collection container (18)
♦ Lift the dirt collection container (18) removing it with the container handle (20)(Fig. 3).
♦ Flip back the handle as per (fig. 4) and remove the " Eco-Active" water filter assembly (21).
♦ Empty the container by tilting it towards the spout (Fig. 9).
♦ Pull the elbow tube (25) from the filter body with the micro pore net (24) until it slides off (Fig. 10a).
♦ Separate all the components and rinse them under running water. (If the filter sponge has te-
ars, replace it).
♦ After drying the various components of the "Eco-Active " water filter, reinsert the water filter as-
sembly, in the water container (18).
Align the arrow located on the elbow pipe (25) with the reference notch located on the fil-
ter body (24) (Fig. 10b - 10c).
♦ Replace the dirt collection container (18) as described in the chapter "Preparing for use"
(page13).
A recommendation for cleaning the dirt collection and the extension tubes, if particularly
dirty: once cleaning is complete, empty the dirt collection as described and place it back
in its housing on the body of the appliance. Connect the appliance to the electrical outlet.
Then vacuum up approximately 50 fl oz (1.5 l) of clean water using the vacuum function for
a few seconds.
The water vortex created inside the dirt collection will rinse the sides and remove any dirt. The
clean water will also clean the inside of the tubes as it travels through them.
Empty the dirt collection container again and put it in its housing.

AFTER USE

19