Troubleshooting; Optional Accessories - Makita PDC01 Manual De Instrucciones

TROUBLESHOOTING

Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,
do not attempt to dismantle the tool, machine, or unit. Instead, ask Makita Authorized Service Centers, always using
Makita replacement parts for repairs.
State of abnormality
The tool or machine
does not start.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Makita genuine battery and charger
• Adapters for 36 V (18 V x 2)
• Adapter for 18 V
• Adapter for 36 V - 40 Vmax
Main power lamp
The lamp lights up in The adapters are not installed to the
green. tool or machine.
The tool or machine, or the cords of
the adapters are overheated.
The tool or machine, or the unit is
broken.
The lamp blinks in The plug of the adapter or power tool/
green. machine and the socket of the battery
box are not connected.
The remaining battery capacity is not
enough.
Two batteries are not installed to
the unit when using the unit with the
battery-powered tool or machine with
higher voltage than 18V.
The remaining battery capacity of two
batteries is not enough.
The unit needs to switch the battery.
The cord of the unit is overheated.
The lamp blinks in red The unit has detected an abnormality.
and green alternately.
The tool or machine, or the unit is
broken.
The lamp does not The unit is not turned on.
light up.
The batteries are not installed to the
unit.
The remaining battery capacity is not
enough.
The unit is broken.
Cause
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
16 ENGLISH
Remedy
Install the adapters to the tool or
machine.
Check that the adapters are installed
securely.
Cool down the tool or machine, unit
and adapter. After cooling down,
power off and then power on again.
Ask Makita Authorized Service
Centers for repair.
Connect the plug and the socket.
Check that the plug and socket are
connected securely.
Charge the batteries, or replace the
batteries with charged ones.
Install at least one battery to battery
port 1 or 2, and at least one battery to
battery port 3 or 4.
Charge the batteries, or replace the
batteries with charged ones.
Switch off the tool or machine, and
then back on.
Press the power button of the unit.
Cool down the unit.
Turn off the unit, and then back on.
Ask Makita Authorized Service
Centers for repair.
Turn on the unit.
Install the batteries to the unit.
Charge the batteries, or replace the
batteries with charged ones.
Ask Makita Authorized Service
Centers for repair.