Safety Instructions - DIAL 9K Manual Del Usuario

Safety Instructions

Warning: Risk of electric shock can cause injury or death. Disconnect all remote electric power
•
supplies before servicing.
• The air conditioner must be installed by professional or qualified persons.
• To ensure the unit work will function properly, please read this manual carefully before installation, and
install strictly according to this manual.
• Do not let air enter the refrigeration system or discharge refrigerant when moving the air conditioner.
• Properly ground all electrical connections.
• Check the connecting cables and pipes carefully, make sure they are correct and firm before
connecting the power supply of the air conditioner.
There must be an air-break switch.
•
• After installing, the consumer must operate the air conditioner correctly according
to this manual, keep a suitable storage for maintenance and moving of the air conditioner in the future.
Fuse of Indoor and Outdoor Units:
•
Model
9K(115V)
12K(115V)
9K-12K(208/230V)
18K(208/230V)
24K-36K(208/230V)
• A residual current device (RCD) with the rating of above 10mA shall be incorporated in the fixed
wiring according to the national rule.
• The best length of the connecting pipe between the indoor unit and outdoor unit is less than 7.5
meters (24.6ft). If the distance is longer than that length, it will affect the efficiency of the air
conditioner.
• This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
• The batteries in the remote controller must be recycled or disposed of properly. Disposal of Scrap
Batteries --- Please discard the batteries as sorted municipal waste at the accessible collection point.
• If the appliance is fixed wiring, the appliance must be fitted with means for disconnection from the
supply mains having a contact separation in all poles that provide full disconnection under
overvoltage category III conditions, and these means must be incorporated in the fixed wiring in
accordance with the wiring rules. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• The appliance shall be installed in accordance with local electrical safety regulations and National
Electrical Codes(NEC).
• The appliance shall not be installed in the laundry.
Fuse of Indoor unit
T 3.15A or T 5A 250V
T 3.15A or T 5A 250V
T 3.15A or T 5A 250V
T 3.15A or T 5A 250V
T 3.15A or T 5A 250V
1
Fuse ot outdoor unit
T 20A 250V
T 25A 250V
T 15A 250V
T 20A 250V
T 30A 250V