Water Drainage - Keystone KSTAP12A Manual Del Usuario

6 WATER DRAINAGE:

During dehumidifying mode:
- Remove the drain plug from the back of the unit,
this unit) to the hole. Place the open end of the hose directly over the drain area in your
basement floor or in a water container (see Fig.4 & 5).
- You can also install the drain connector (5/8" universal female mender) with 3/4" hose (locally
purchased by consumer) for garden hose use.
NOTE:
When the water level of the bottom tray reaches a predetermined level,
-
the digital display area shows P1
location, remove the bottom drain plug and let the water drain away (Fig.6). Restart the machine
" "
until the P1 symbol disappears. If the error repeats, call for service.
" "
and the unit stops operation. Carefully move the unit to a drain
Remove the
drain plug
Fig .4
OPERATING INSTRUCTIONS
attach a section of drain hose (included with
Continuous
drain hose
Fig .5
the unit beeps 8 times,
F ig.6
10