D-Link ShareCenter Pro 1100 Guía De Instalación Rápida página 7

4. Configuration with Wizard
When first powered on, during the initial boot sequence, the ShareCenter Pro will wait
to be assigned an IP address via DHCP. If it does not receive a DHCP assigned IP
address, by default it will have an auto-assigned IP address of 169.254.x.x (where
"x" is dynamic). It is recommended to use the included D-Link EZ Search Utility when
accessing and configuring the ShareCenter Pro for the first time. If you want to change
the IP address before logging in or are unable to connect to the ShareCenter Pro IP
address, you can use the EZ Search Utility provided on the product CD to locate the
device on your network and make any needed changes.
Network Storage The EZ Search Utility displays any ShareCenter Pro devices it detects on the
Device network here.
Refresh Click Refresh to refresh the device list.
Configuration Click Configuration to access the Web based configuration of the
ShareCenter Pro.
LAN Configure the LAN Settings for the ShareCenter Pro here.
Apply Click Apply to save changes to the LAN Settings.
iSCSI Drive Displays the available iSCSI targets on ShareCenter Pro.
Mapping
Connect Click Connect to connect to the iSCSI target.
Management
Click Management to edit the information.
Drive Mapping Volumes available for mapping are displayed here.
Available Drive Choose an available drive letter.
Letters
Click Connect to map the selected volume.
Click Disconnect to disconnect the
selected mapped volume.
About Click About to view the software version of
the EZ Search Utility.
Exit Click Exit to close the utility.
D-Link DNS-1100-04 Quick Installation Guide
EZ Search Utility
7