Measuring Height; Measuring Body Mass Index (Bmi) - Adam MDW-300L Serie Manual Del Usuario

5.2

MEASURING HEIGHT

• To measure someones height, it is necessary to extract the measuring rod and
place the height arm on top of the head of the person being measured.
• For shorter heights the height arm can be released by pressing the red button
on the top of the height rod, and then moving the height arm to the lower
section of the height pillar.
• The height is read on the bar at the top of the support. The height can be read
in either centimetres or inches,
5.3

MEASURING BODY MASS INDEX (BMI)

• Once the height has been determined it is possible to enter the height reading
into the display ready for the scale to compute the BMI.
• Press and hold the [Unit/BMI] key to enter the BMI mode. The display will
show the last height value used, "Cm123" or "In123" depending on which
weighing unit you are currently using.
• The height entry unit (Cm or In) will be flashing to show you which unit you are
currently in, use the Up arrow key to change the height entry unit between Cm
to In as required
• Enter your height using the arrow keys, the [Print/Hold] / key will increment
the flashing digit, the right arrow, the [Unit/BMI] / key, will move the flashing
digit to the adjacent digit.
• Press the [Tare]/↵ key to confirm the value.
• The display will now show the BMI based on the current weight on the scale
and the height entered.
• Press the [Unit/BMI] key to exit the BMI mode and return to normal weighing.
• The Hold function will work as described above whilst in the BMI mode.
Page 8