Adam MDW-300L Serie Manual Del Usuario página 6

9. Place the indicator cable (4) and the
load cell cable (13) together near the hole
on the base (16).
10. Plug the two connectors (15) together.
11. Position the connector inside the base
(16).
12. The cables should be fixed to the base
using the clip provided (14).
13. Locate the fixing bolt and washer
(10) used to secure the height rod to
the scale base (11)
14. Locate the height rod (7) onto the
fixing points (9) of the upper and lower
brackets (8) & (12).
15. Secure the bolt and washer to the
bracket on the base (10)
16. Tighten the bolt on the upper
bracket (9).
Page 6