Overview; Introduction To The Aswc-1 Interface And Wiring Harness - Axxess ASWC-1 Manual De Instalación

Introduction to the ASWC-1 Interface
and Wiring Harness
On the top of the ASWC-1 interface there are three points of interest:
1) The Programming LED – Flashes rapidly when in auto detect mode,
f lashes slowly in manual programming mode.
2) The Reset Button – Hold down button for 3 seconds to start auto
detect mode; hold down longer then 10 seconds to start manual
programming mode.
3) The Slide Cover (USB Port Cover) – Open this up to reveal
the USB update port. Using a standard Micro "B" to USB cable or
Metra's USB-MINI-CAB update cable you can make sure you always
have the latest updated inventory.
USB Port Cover

Overview

Reset Button
4
Programming LED