Installing The Batteries - IPC YP 1/5 BACKPACK Uso Y Mantenimiento

Before recharging the batteries
(for Model 24 V)
Remove the charger and the battery from the
pack.
- Plug the cable (13 Fig.11) to the battery
(14 Fig.11).
- Connect the charger to the socket.
(15 Fig.11).
NOTE:
After connecting the power cable (15 Fig. 11)
before connecting the cable (13 Fig.11) to
the battery (14 Fig. 11) the charger WON'T
WORK.
- On the charger (15 Fig. 11) the „green"
led will blink twice (16 Fig. 11) indicating
proper functioning;; then, the red led will
turn on (17 Fig. 11) or the yellow one (18
Fig. 11) depending on the battery's condi-
tion.
- When the charger light turns greeb (16
Fig. 11) the batteries are charged.
NOTE:
Do not leave the cable (13 Fig. 11) con-
nected to the battery with the network cable
disconnected from the charger; the batteries
may discharge and could be damaged.

Installing the batteries

(for 24V model)
- Check if the switch (27 Fig.16) is on posi-
tion "0".
- Place the battery (14 Fig. 12) on the de-
vice by inserting the contacts (19 Fig. 12)
in the wholes (20 Fig. 12).
- Press the battery (14 Fig. 13) down until
you here a coupling „CLICK".
- Make sure that the lever (6 Fig. 13) is fac-
ing down and that in the slot (7 fig. 13)
appears the green color indicating the
correct coupling.
Positioning device on the shoulders
- Lift the unit and place it on your shoul-
ders.
- Adjust the shoulder straps (21 Fig.14)
with the help of the buckles (22 Fig.14).
- Adjust the belt (23 Fig.14) using the buck-
le (24 Fig.14).
NOTE:
On the belt (23 Fig.14) are positioned elastic
tapes (25 Fig.14) which serve for the posi-
tioning of accessories such as the dusting
brush, for tight spaces, etc...
usE Of EQuIPMENT
start-up of equipment
- Insert the plug (26 Fig.15) in the socket
(230V model only).
- Press the switch (27 Fig.16) to "I" (the
lamp lights switch only for the 230V mod-
el).
NOTE:
You can adjust the suction force acting on
the switch (28 Fig.17), positioned on the er-
gonomic handle (10 Fig.17).
Opening the window (29 Fig.17) lowers the
suction force.
For the 24 V device, PLEASE NOTE:
For a greater autonomy of the battery you
must stop the power supply during transfers.
EN - 3