Alto Professional Stealth PRO Guia Del Usuario página 7

Example 2 – Stereo Operation
To send stereo signals through the Stealth Pro transmitter to two receivers:
1. Connect your mixer's main outputs to the corresponding input channels on the Stealth Pro
transmitter, and connect the receivers' outputs to your loudspeakers' inputs. Keep all mixer
volume and transmitter volume controls at their minimum settings.
2. Power on the Stealth Pro transmitter and receivers. Set their channels to matching numbers. See
the instructions for using the Auto Sync function in
3. Adjust the transmitter and receiver antennas to a vertical position for best results in transmitting
the wireless signal. If the wireless signal quality is poor, change the position of the antennas.
4. Set the transmitter to Stereo and adjust the Volume control to get a strong signal without
clipping.
5. Turn on your loudspeakers, adjust the output level on your mixer, and adjust the Volume control
on the transmitter to hear the audio signal. If you hear noise in the signal, change to a different
channel until a clean signal comes through. See the instructions for changing the RF frequency in
Operation for more information.
Receiver
Powered Speaker
Power
Mixer
Operation for more information.
Power
Transmitter
Powered Speaker
Receiver
Power
7