Alto Professional Stealth PRO Guia Del Usuario página 11

Features
Transmitter
Front Panel
1. Power Switch: This switch turns the
transmitter on or off.
2. Display: This display shows the current
channel, frequency, and AF volume
level. See Display
3. Up/Down (+/–): Use these buttons to
adjust the selected
Display.
4. Volume: Press this button to adjust the incoming signal level.
5. Sync: Press this button to automatically synchronize with the receiver. See
information.
6. Freq: Press this button to manually select the RF frequency and channel for each stereo channel.
The selected channel will flash on the Display. See
i. Press once to manually adjust the Left Channel.
ii. Press a second time to manually adjust the Right Channel.
iii. Press a third time to exit manual frequency adjustment mode.
Display
1. AF: This meter shows the current audio signal
level received from the Combo Inputs.
2. Frequency: This is the current RF frequency in
MHz.
3. Channel (region specific): This is the current RF
channel number.
channels depends on your region.
Rear Panel
1. Power Connector:
included 12 V, 1.0 A power adapter
here.
2. Combo Inputs: Connect balanced or
unbalanced 1/4" (6.35 mm) or XLR line-
level sources here.
3. Mono/Stereo Select: Adjust this switch to change the wireless signal that is sent to the receiver
to be either mono or stereo.
4. Antenna Terminals: Attach the BNC antennas to these connectors. Place the antennas in a
vertical position for best results in transmitting the wireless signal. If the wireless signal quality is
poor, change the position of the antennas.
for more information.
value on the
The number of
Connect the
6
5
4
Operation
available
3
4
3
2
Operation
for more information.
2
1 3
2
3
1
for more
2
1
4
1
11