Alto Professional Stealth PRO Guia Del Usuario página 13

Display
1. RF: During the scan process, the RF meter shows the
relative amount of RF noise on each scanned
frequency. A low meter value means that the RF
channel is clear, while a high RF meter value indicates
that there is a significant amount of RF interference on
the currently scanned channel.
2. AF: This meter shows the current audio signal level
sent from the receiver's Audio Output.
3. Frequency: This is the current RF frequency in MHz.
4. Channel (region specific): This is the current RF channel number. The number of available
channels depends on your region.
5. L/R: Indicates which stereo channel the receiver is receiving from the transmitter.
6. Delay: Indicates whether the Delay function is on or off and displays the selected measurement
unit. The available measurement units are milliseconds (ms), feet (ft.), and meters (m).
Rear Panel
1. Power Connector: Connect the included 12 V, 1.0 A
power adapter here.
2. Audio Output (mini-XLR): Use the included mini-XLR
to XLR cable to connect this balanced output to your
loudspeaker.
6
1
4
2
3
2
5
1
13