Prolux Dollys 405 785 Instrucción De Funcionamiento Original página 19

Original operating instruction - Dollies
9. Attaching the tensioning strap
Guide the tensioning strap past the vehicle's tyre and attach the end hooks to the brackets on the dolly
handle.Tighten the belts to attach the vehicle to be towed to the dolly.
Transport
Never drive faster than 90 km/h
if you are towing a vehicle with the dolly.
ITD dollies are only suitable for towing on roads Motorways must be left at the next exit To avoid potholes
or drive through only at low speed ITD recommends that the towed vehicle be switched to neutral so that the
wheels can turn with the dolly.
Lowering
The Dolly must be loaded and unloaded by the same person.
Changing the operator can lead to accidents due to unexpected loads.
1. Remove the tensioning straps
2. Release the cam lock Hold one hand on the tipping bar and release the cam lock by turning the handle.
Be careful not to be hit by the rotating tipping bar.
3. Release the cam lock
Turn the cam lock handle to release it.
The trolley is designed in such a way that the wheel will only
move down on a flat surface when it is moved by the tipping bar.
4. Replace the tipping bar
Hold the tipping bar with both hands and reinsert it into the receiving tube
19
English