Setup Requirements - Angelcare AC017 El Manual Del Propietario

the air to circulate. Therefore, mildew build up could develop underneath
the mattress in the Sensor Pad area. We suggest rotating the mattress
regularly to prevent any mildew.
10. IMPORTANT SAFETY INSTRUCTIONS RELATED TO USE OF BATTERIES
10.1 Use ONLY the type and size of battery specified in the owner's manual.
There is a risk of explosion if battery is replaced with an incorrect type.
10.2 DO NOT use rechargeable batteries in the Nursery Unit. Use alkaline
batteries ONLY.
10.3 DO NOT dispose batteries in fire. They may explode. Check with local
regulations for possible special disposal instructions.
10.4 Exercise care in handling batteries in order not to short out the
batteries with conducting materials such as rings, bracelets and keys.
Overcharging, short circuiting, reverse charging, mutilation, or incineration
of batteries must be avoided to prevent one or more of the following
occurrences: release of toxic materials, release of hydrogen and/or oxygen,
gas and rise in surface temperature.
10.5 DO NOT attempt to rejuvenate the battery provided with or identified
for use with this product by heating them. Sudden release of battery
electrolyte may occur, causing burns or irritation to eyes or skin.
10.6 If and when necessary, the battery must be replaced with identical
new ones or equivalent (volts and size).
10.7 Reverse polarity installation of the batteries in the end product must
be avoided. Reverse insertion of batteries can cause charging, and that
may result in leakage or explosion.
10.8 Remove the battery from this product if you store the product over 30
days because the battery could leak and damage the product.
10.9 Discard 'dead' batteries as soon as possible since 'dead' batteries
are more likely to leak in a product. If a battery has leaked or vented, it
should be replaced immediately using protective gloves.
10.10 DO NOT store this product, or the battery provided with or identified
for use with this product, in high-temperature areas.

SETUP REQUIREMENTS

INCLUDED:
Nursery Unit
WHAT YOU WILL NEED (NOT INCLUDED):
Tabletop stand Wireless movement Sensor Pad
(for Nursery Unit) * Always place Angelcare
WARNING
(North America Only)
11. Modifications not authorized by the manufacturer may void users
authority to operate this device.
11.1 NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications.
11.2 However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
11.3 This device complies with the part 15 of the FCC Rules and the
Industry Canada license - exempt RSS standards(s). Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
IC Warning :
12. This device complies with industry Canada RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including inferences that
may cause undesired operation of the device.
12.1 Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Model AC017
Baby Breathing Monitor
logo side up *
®
Miniature Philips Screwdriver
E
N
CR3032 battery
(for Sensor Pad)
2X
2 AAA Alkaline
Batteries
3