Product Mounting Diagram - Chauvet DJ EVE E-100Z Guía De Referencia Rápida

EVE E-100Z QRG
AC Power
Power Linking
Fuse
Replacement
Mounting
Product
Mounting
Diagram
Control Panel
Description
This product has an auto-ranging power supply that can work with an input voltage
range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
For the maximum number of EVE E-100Z products that you can power link at each
voltage, see the User Manual or the sticker on the product.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the
Mounting Clamp
(such as the CLP-15N
from Chauvet)
Safety Cable
(such as CH-05
from Chauvet)
Bracket Adjustment Knob
Button Function
<MENU>
Exits the current menu or function
Navigates up through the menu list or increases the numeric
<UP>
value when in a function
<DOWN> Navigates down through or decreases the numeric value
<ENTER>
Activates a menu option or a selected value
Safety Notes.
4
EN
Mounting
Bracket