Telstar THE072320MD Manual De Instrucciones página 45

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Warning-Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the appliance is defec-tive, unplug the appliance from the mains
or switch o the circuit breaker in the fuse box. Contact the after-sales service.
Maximum operating time
The maximum operating time of this appliance is 9 hours, to prevent that you forget shot o the power.
Replacing the lamp on the corner of the cavity
If the cavity lamp fails, it must be replaced. Heat-resistant, 25 watt, 230 V halogen lamps are available from the
after-sales service or specialist retailers.
When handling the halogen lamp, use a dry cloth. This will increase the service life of the lamp.
WARNING
Risk of electric shock!
When replacing the lamp, the lamp socket contacts are live. Before replacing the lamp, unplug the appliance
from the mains or switch o the circuit breaker in the fuse box.
Risk of burns!
The appliance becomes very hot. Never touch the interior surfaces of the appliance or the heating elements.
Always allow the appliance to cool down. Keep children at a safe distance.
1.
Place a towel in the cold cavity to prevent damage.
2.
Turn the glass cover anti-clockwise to remove it.
3.
Pull out the lamp – do not turn it.
4.
Screw the glass cover back in.
5.
Remove the towel and switch on the circuit breaker to see if lamp switches on.
Insert the new lamp, making sure that the pins are in the correct position. Push the lamp in firmly.
Glass cover
If the glass cover of the halogen lamp is damaged, it must
be replaced. You can obtain a new glass cover from the
after-sales service. Please specify the E number and FD
number of your appliance
45
BUILD IN OVEN
THE072320MD
Tabla de contenido
loading

Tabla de contenido