Telstar THE072320MD Manual De Instrucciones página 37

Caution!
Risk of surface damage
Do not use:
1. Harsh or abrasive cleaning agents.
2. Cleaning agents with a high alcohol content.
3. Hard scouring pads or cleaning sponges.
4. High-pressure cleaners or steam cleaners.
5. Special cleaners for cleaning the appliance while it is hot.
Wash new sponge cloths thoroughly before use.
Tip
Highly recommended cleaning and care products can be purchased through theafter-sales service.
Observe the respective manufacturer's instructions.
Area Appliance exterior
Appliance exterior Stainless steel front
Plastic
Painted surfaces
Control panel
Door panels
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.Remove
flecks of limescale, grease, starch and albumin (e.g. egg white)
immediately.
Corrosion can form under such flecks.
Special stainless steel cleaning products suitable for hot surfaces
are available from our after-sales service or from specialist retailers.
Apply a very thin layer of the cleaning product with a soft cloth.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth. Do not
use glass cleaner or a glass scraper.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth. Do not use
glass cleaner or a glass scraper.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Do not use a glass scraper or a stainless steel scouring pad.
37 37
BUILD IN OVEN
THE072320MD
Cleaning