Set The Clock (Manually); Set The Date - SOUNDMASTER Highline UR2025 Manual De Instrucciones

2.1 Auto-run Mode (Radio OFF)
•
Press <MODE> once to go to different mode sequentially.
• Auto-run Mode
(with Clock display)
Timer Format Select (12/24)
•
In radio mode, If RDS information is transmitted by the station, the station name appears in place of
the frequency; the frequency is displayed when there is no RDS information had been received.
•
Press <AL1> to review/set the alarm-1.
•
Press <AL2> to review/set the alarm-2.
•
Only when the radio is ON, press <MEM>,<M1-M10>and then <MEM> again to store the current
station into memory.
•
Only when the radio is ON, press <Vol. +> and <Vol. -> to adjust speaker volume.
•
When the radio is ON, press <MEM/AMS> to preview those preset memory. Press and hold for 2
seconds to activated the AMS (Automatic Memory Storage).
•
At every minute boundary, the real time clock is compared with the alarm setting if it has been
enabled. For details, please refer to the section of 'When alarm is active'.

2.2 Set the clock (manually)

•
Press <MODE> once when the unit stays in clock display mode.
•
The clock goes flashing the LCD with day-flag cleared.
•
The second keeps counting up once per second.
•
Press <UP> to advance the clock by 1 minute.
•
Press <DOWN> to move the clock back by 1 minute
•
Press and hold <UP> or <DOWN> to set the clock in fast mode of 10 minutes per step.
•
Press <MODE> once to set the date.
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode.

2.3 Set the date

• Press <MODE> once in date setting mode.
•
The current date goes flashing in the format of dd.mm.yyyy in the LCD.
•
Press <UP> or <DOWN> to change the current setting by 1 day per step. Press and hold <UP> or
<DOWN> to change the setting in fast mode of 10 days per step. The day flag will be updated
automatically when the date has become steady.
•
Press <MODE> once to confirm the current setting and it switches to set the SDA.
•
Press other key to start its corresponding function.
Set the Clock
Dimmer ON/OFF
Instruction manual / UR2025
Set the Date
Automatic update ON/OFF
Set the SDA
P3 of P8