Adjustable Vent; Oxygen/Pressure Port; Mask Cushion Removal And Replacement - Sunrise Medical DeVilbiss FlexSet 9354 Serie Guía De Instrucciones

U s e I n s t r u c t i o n s
A
DJUSTABLE
Oxygen/
The DeVilbiss FlexSet Mask has a patented feature that allows you to select the direction of the airflow exiting from the exhaust ports. The
Pressure Port
direction of the airflow can be adjusted by turning the Adjustable Vent from one side to the other Figure 13.
Vent Holes
Adjustable
Vent
O
XYGEN
This is for monitoring pressure during a sleep study or adding oxygen if prescribed by your physician. Simply remove the oxygen/pressure port
cover Figure 13 and secure your tubing to this port.
Figure 13
M
ASK
The FlexSet Mask has two sizes of cushion: standard and shallow. Both sizes are available in either silicone or gel options.
To remove the cushion:
1. Gently pull the cushion away from the mask body.
To replace the cushion:
1. Place the mask cushion onto the mask body by first aligning the alignment mark on the top of the cushion with the alignment on the mask
Figure 14
Figure 15
V
ENT
/P P
RESSURE ORT
Oxygen supports combustion. To avoid possible physical injury, do not smoke while using your CPAP with supplemental oxygen.
Do not use near hot sparking objects or open sources of flame.
C R R
USHION EMOVAL AND EPLACEMENT
body, Figure 15. Next, push the top area of the mask cushion onto the mask body, Figure 16. Continue attaching the cushion to the mask
body along the sides and bottom until the cushion is completely secured, Figure 17. If necessary, adjust the position of the cushion to
eliminate any wrinkles in the cushion.
Alignment Marks
Figure 16
Figure 17
9
A-9354