Weather Station Basic Settings; Dcf-77 Synchronisation; Setting The Time Zone - Auriol 276553 Instrucciones De Utilización Y De Seguridad

Weather station basic settings

Press the CLOCK button again to return to the time
display.

13.2 DCF-77 synchronisation

This functions sets the time and date automatically.
Press to activate the synchronisation for radio-con-
trolled DCF-77 time information.
Press and the symbol appears on the display.
When the transmission signal is received, a symbol
appears. If no radio waves appear, no DCF 77
reception is available in this location. If the reception
is stable, the symbol is shown continuously on the
display after approx. 3–5 minutes.
Press again to deactivate the DCF-77 synchroni-
sation.
WARNING!
The displays for time and date in Central Europe are
transferred via DCF-77 radio signals. The transmitter
is close to Frankfurt and transmits on a transmission
radius of approximately 1500 km. If your weather
station receives this signal, it is not necessary to
switch to and from daylight savings time.
The reception quality can be restricted by the geo-
graphical location (e.g. deep valleys) or structural
conditions (e.g. behind concrete walls).
Electromagnetic fields can also have a negative in-
fluence on signal (DCF) reception. Position the
weather station and the external sensor in a suitable
location. Follow the instructions listed under "DCF-77
synchronisation" to switch on the transmission signal
again.
34 GB/IE

13.3 Setting the time zone

You can switch between local time and the selected
zone time while the time is displayed. The time zones
are divided into 24 zones. You can select a time
zone from +12 hours to –12 hours.
Setting the time zone:
Press and hold the ZONE button for approximately
3 seconds. A confirmation signal sounds and 0 flashes
on the display.
Press ▲ and ▼ to set the time zone. You can select
a time zone from +12 hours to –12 hours.
Press the ZONE button to return to the time display.
If no setting button is pressed for 60 seconds while
in the time zone setting mode, the weather station
automatically returns to the time display.
You can use the ZONE button to display the selected
time zone. ZONE appears next to the time. By pressing
the ZONE button again, you are returned to your
local time.
WARNING!
When setting the time zone, use the
following specifications: