Controls; Control Settings; Interior Light - GE GWS04 Manual Del Propietário

Controls

Auto Bev

Control Settings

The temperature range of the wine center/beverage and
The display shows the average temperature of the
slightly during operation.
Auto Temperature Setting
upper left corner stays lit.
Normal Temperature Setting
The temperature of the appliance can be set anywhere
pads.
1. Press and hold the SET pad. You will hear a series of
2 beeps.
to increase or decrease the desired temperature in
will flash.
When the Wine Center/Beverage and Wine Center is Plugged In
After plugging in the wine center/beverage and wine
center and setting the desired temperature, allow the
appliance to reach the set temperature before loading
your wine. The temperature may take up to 12 hours to
After loading the wine and/or beverages, you may notice
the actual temperature rise. This is normal. The actual
temperature will continue to change as the wine and/
or beverages are cooled to the set temperature. The
temperature may take up to 12 hours to completely

Interior Light

You can turn the light ON or OFF by pushing the light
switch located on the right side of the control panel
inside temperature.
49-60734-2
3. Press SET to confirm your choice. The display
seconds, the unit will automatically accept your
change.
NOTE: When you change the temperature setting, there
run.
Fahrenheit and Celsius
The temperature display can be changed between
pad for approximately 5 seconds.
Indicator Light
The indicator is lit when the compressor is running to
idle.
Interior Light
To switch the interior light on/off, simply press the
pad.
A guide with wine serving
temperature suggestions is
located on the inside right
recommended temperatures
for different wines, as well
as instructions on adjusting
the temperature of the wine
center/beverage and wine
center
NOTE: The exterior of the
cabinet may get warm. This
is normal.
5