Lesson Mode
The Lesson Mode feature divides the 88 keys into two zones with the same pitch and voice. This enables
both the student and teacher to easily watch and/or play together during instruction without having to move
away from the piano and take turns or having to reach over each other to play the same pitch.
Note: In Lesson Mode, the Layer and Split Modes will be automatically disabled.
To enable or disable Lesson Mode, press the Lesson button.
To select a voice for both zones in Lesson Mode, press one of the Voice buttons.
To change the split point in Lesson Mode, press and hold the Split button, press a key between C3 and C6,
and then release the Split button. The default split point is E3.
To change the octave of the both zones in Lesson Mode:
1.
In Lesson Mode, press the Metronome and Lesson buttons at the same time to enter Advanced
Function Mode. The two button LEDs will be lit.
2.
Use the keys marked Octave + or Octave - to adjust the octave value. Press both keys at the same
time to restore the default octave value to 0.
3.
Press both the Metronome and Lesson buttons again to exit Advanced Function Mode.
Auto Power Off
In order to save energy, the Recital digital piano will automatically shut down after 30 minutes if it is not
used.
To enable or disable the Auto Power Off function:
1.
Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The
button LEDs will be lit.
2.
Use the keys marked Auto Power Off to enable or disable the Auto Power Off function.
3.
Press both the Metronome and Lesson buttons again to exit Advanced Function Mode.
Restore Factory Default Settings
To restore your Recital to the factory default settings, hold the Reverb and Chorus buttons while powering
on the Recital digital piano. The following parameters will be reset to their default values: Reverb, Chorus,
Metronome Tempo, Metronome Time Signature, Metronome Volume, Upper Volume, Lower Volume, Split
Volume, Split Point, MIDI Channel, Touch Sensitivity, and Auto Power Off.
10