Parameter Menu - CARLO GAVAZZI EM111 Instrucciones De Instalacion Y Uso

Parameter menu

*
Fig. 14
NOTE *: the value settings page automatically opens after 3 s.
To navigate in the menu, see "Commands" on page 3. Default values are underlined in the table.
Shared pages
Page
Enter current password
PASS
nPASS Change password
Measurement type
MEASurE
P int Average power calculation interval (minutes)
Display mode
MOdE
tArIFF Tariff management
Enable energy tariff, maximum requested
power, partial active energy and partial
rESET
reactive energy reset (the last two only sent via
serial port)
Return to the initial measurement page
End
8021438 | EM111
Description
S1
O1
M1
Current password.
Four digits (0000–9999)
A: easy connection, measures total energy without
considering the direction/ b: separately measures
imported and exported energy
1–30
Full : complete mode/ Easy : reduced mode.
Measurements not displayed are still sent via serial
port.
On: enabled/ Off: disabled
No: cancel reset/ Yes: enable reset
–
©2014 | CARLO GAVAZZI Controls SpA| 6
Values