Idiomas disponibles
Idiomas disponibles
Anleitung HLG 2000 SPK7
GB
Before starting operation, be
sure to read the operating and
safety instructions!
Proper use
The hot air gun is designed for hea-
ting shrink-down plastic tubing, for
stripping paints and for welding and
shaping plastics.
Attention:
Fire hazard during use! Diagram
of the hot air pistol:
1 nozzle
2 2 level ON/OFF switch
3 suspension shackle
4 power cable
5 Deflector nozzle
6 Fishtail nozzle
7 Cone nozzle
8 Reflector nozzle
9 Paint scraper
Technical data:
Nominal voltage:
230 V ~ 50 Hz
Power rating:
2000 watt
Temperature:
350°C / level 1
550°C / level 2
Air rate:
300 l / level 1
500 l / level 2
Weigth
6
29.11.2005
10:01 Uhr
Safety Instructions:
G
Before plugging in the power
supply cord, be sure that the
ON/OFF switch is in the central
position.
G
The nozzle reaches temperatu-
res of up to 600°C. Fire hazard!
Wear protective gloves and
eye wear. The nozzle should
not be touched during
operation.
G
Allow the hot air pistol to comple-
tely cool before putting away.
G
Never expose the unit to rain or
moisture. Store the unit in a dry
place.
G
Do not leave the unit unattended.
Keep out of reach of children.
G
Never direct the air flow at
people or animals. Do not use
the unit to dry clothing or hair.
Do not use the hot air blower
as a hair dryer.
G
Do not use the unit near easily
flammable or explosive sub-
stances or gasses.
G
Never block the hot air flow by
plugging or covering the air flow
exit.
G
Use only original accessory and
replacement parts from the
manufacturer.
G
Do not wear loose clothing or
0,7 kg
jewelry. Wear slip-resistant
shoes and wear a hair net for
long hair. During operation main-
tain a secure footing.
G
Never use the unit in wet surro-
Seite 6
