LEGRAND Wattstopper CX-105 Instrucciones De Instalación

LEGRAND Wattstopper CX-105 Instrucciones De Instalación

Sensor de ocupación pir
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

No: 24228 – 11/16 rev. 1
Catalog Number • Numéro de Catalogue • Número de Catálogo: CX-105
Country of Origin: Made in China • Pays d'origine: Fabriqué en Chine • País de origen: Hecho en China
CX-105-U is BAA and TAA compliant (Product produced in the U.S.)
The CX-105 is a 24VDC passive infrared (PIR) occupancy sensor which controls lighting and HVAC systems based on occupancy.
PIR sensing systems are passive systems which react to changes in infrared energy (moving body heat) within the coverage area. PIR
sensors must directly "see" motion of an occupant to detect them, so careful consideration must be given to sensor placement.
Coverages shown are maximum and represent coverage for walking motion. Actual coverage will vary slightly depending on mounting
height and furnishings.
Masking the lens: Opaque adhesive tape is supplied so that sections of the sensor's lens can be masked. This restricts the sensor's
view and allows you to eliminate coverage in unwanted areas.
Dense Wide Angle Lens (Standard)
up to 2000 sq ft for walking motion
up to 1000 sq ft for desktop motion
Two-Sided Aisleway Lens (-3)
up to 134 linear ft for walking motion
Wattstopper
PIR Occupancy Sensor
Détecteur de Mouvement IRP
Sensor de Ocupación PIR
Installation Instructions • Instructions d'Installation • Instrucciones de Instalación
UNIT DESCRIPTION
COVERAGE PATTERNS
®
SPECIFICATIONS
Voltage ................................................................. 24VDC
Current Consumption ............................................... 8mA*
Power Supply ............................ Wattstopper Power Pack
Time Adjustment ........................ 15 seconds—30 minutes
Sensitivity Adjustment ..................... Minimum—Maximum
*Current consumption can be slightly higher when only one
sensor per power pack is used.
Long Range Lens (-1)
up to 90 linear ft for walking motion
One-Sided Aisleway Lens (-4)
up to 50 linear ft for walking motion
Tabla de contenido
loading

Resumen de contenidos para LEGRAND Wattstopper CX-105

  • Página 9: Descripción De La Unidad

    INSTRUCCIONES EN ESPAÑOL DESCRIPCIÓN DE LA UNIDAD ESPECIFICACIONES El CX-105 es un sensor de ocupación infrarrojo pasivo (PIR) de Voltaje .................24 V CC 24 VCC que controla los sistemas de iluminación y de climatización Consumo de corriente ............8 mA* en función de la ocupación.
  • Página 10: Instalación

    INSTALACIÓN Los sensores CX-105 pueden montarse a la pared o al cielo raso con el soporte giratorio Fig. A suministrado, y con la placa de la cubierta de la caja de conexiones suministrada, si es necesario (consulte la figura C). El montaje a la altura del accesorio es más efectivo.
  • Página 11: Instrucciones De Cableado

    INSTRUCCIONES DE CABLEADO Cada fuente de alimentación de la serie BZ de Wattstopper puede suministrar ADVERTENCIA: DESCONECTE LA energía a 6 sensores CX-105. ALIMENTACIÓN EN EL DISYUNTOR Cuando se utilicen más sensores, se necesitarán varias fuentes de ANTES DEL CABLEADO. alimentación.
  • Página 12: Información Para Pedidos

    No. 24228 – 11/16 rev. 1 © Copyright 2016 Legrand All Rights Reserved. 800.879.8585 © Copyright 2016 Tous droits réservés Legrand. www.legrand.us/wattstopper © Copyright 2016 Legrand Todos los derechos reservados.

Tabla de contenido