HP OFFICEJET 4610 Guía De Instalación Inicial página 24

Solve setup problems
Step 1: Make sure the wireless (802.1 1) light is turned on
If the blue light near the printer's wireless button is
not lit, the wireless capabilities might not have been
turned on.
To turn on wireless, press the
the printer control panel. If you see a Wireless is Off
option in the list, using the buttons on the right, select
Step 2. Make sure the computer is connected to the network
Make sure your computer is connected to your
wireless network. If the computer is not connected
to the network, you cannot use the printer over the
network. If you are unable to get your computer
Step 3. Restart components of the wireless network
Turn off the router and the printer, and then turn them
back on in this order: router first and then the printer.
If you still are unable to connect, turn off the router,
printer, and your computer, and then turn them back
Step 4. Run the Wireless Test Report
For wireless networking issues, run the Wireless Test
Report.
For more information, see "Step 2: Test the wireless
connection" on page 19.
Tip: If the Wireless Test Report indicates the
signal is weak, try moving the printer closer to
the wireless router.
Wireless Settings, select Wireless: On/Off, and then
select On.
(Wireless) button on
connected to your network, contact the person who
set up your network or the router manufacturer as
there might be a hardware issue with either your
router or computer.
on in this order: router first, then the printer, and
then the computer. Sometimes, turning off the power
and then turning it back on recovers from a network
communication issue.
24
Reducing interference
The following tips might help reduce the
chances for interference in a wireless network:
•
Keep the wireless devices away from large
metal objects, such as filing cabinets, and
other electromagnetic devices, such as
microwaves and cordless telephones, as
these objects can disrupt radio signals.
•
Keep the wireless devices away from large
masonry structures and other building
structures as these objects can absorb radio
waves and lower signal strength.
•
Position the access point or wireless router in
a central location in line of sight with the
wireless devices on the network.
•
Keep all wireless devices on the network
within range of one another.