Tabla de contenido
GUID-87D66EC4-150F-49DA-9128-FC7EF637032E
Installing the M.2 Solid State Drive (SSD)
NOTE:
Before installing SSD card, ensure that the battery is fully charged or the power cable is plugged in.
1
Place the SSD clip on the computer.
2
Tighten the M2.0x3.0 screw that secures SSD clip to the computer.
3
Insert the SSD into the socket on the computer.
4
Tighten the M2.0x3.0 screw to secure the SSD to the computer.
5
Affix the adhesive tape following the SSD card.
NOTE:
For models shipped with NVMe SSDs, the SSD requires installation of a thermal plate over it.
6
Install the:
a
battery
b
base cover
7
Follow the procedure in
After working inside your
computer.
Extracción e instalación de componentes
17
Tabla de contenido
