Deleting A User Code; Duress User Code Setup; Setting The Duress User Code; Secret Duress Button - Nortek Security & Control 2GIG e Serie Guia Del Usuario

GC2e Wireless Security System | User Guide
4 To confirm the user code, enter the new code again.
Tap OK.
5 A confirmation screen appears, showing that the
user code was changed. Tap OK.

Deleting a User Code

1 To delete a user code from the User Management
screen, tap the User button.
2 Tap Delete.
3 A confirmation screen appears to verify that you want
to delete the user code. If Ok, tap Delete User or tap
Cancel to return to the user codes Access Option
screen.
4 A confirmation screen appears displaying the user code
that was deleted. Tap OK.
TIP: You can change the master user code, but you cannot
delete it.

Duress User Code Setup

The Duress Code (User Code #8) initiates a silent alarm
for help by secretly sending a Duress report to the Central
Station.
Use the duress code when someone is forcing you to
operate your security system against your will. When you
use the duress code, a silent report is immediately sent to
the Central Station and they will dispatch help.

Setting the Duress User Code

1 On the User Management screen, tap the User 8
(Duress) button.
2 A confirmation screen appears: Tap Create Duress
User.
3 Enter a four (4)-digit code to use as the new duress
code. Then tap OK.
4 To confirm the duress code, enter the code again and
tap OK.
5 A confirmation screen appears. Tap OK.
6 The User 8 edit screen appears. To return to the User
Management screen, tap Back.

Secret Duress Button

On the Home screen, the system logo always appears in
the lower right corner. When the system is disarmed, the
system logo is the secret duress button.
While Armed
The sytem logo is not the only area to enter the duress
code when armed. You can also press the disarm button
then enter the duress code. You can also enter the duress
code anytime the keypad is displayed during the arming
process. The system disarms normally, but a silent duress
report is sent to the Central Station and they will dispatch
help. If supported by the 2GIG Alarm dealer, the left side of
this screen also displays contact information for the alarm
dealer or Central Station.
28
System Toolbox
Copyright © 2019 Nortek Security & Control