ECOFOREST CANTINA SUPER Manual De Instalación Y Mantenimiento página 39

5.8. Cleaning oulet.
You access to the cleaning outlet, which must be thoroughly cleaned, just like the collector of gas outlet,
since its proper operation will depend on a correct cleaning.

Cleaning outlet.
It is recommendable to calculate the frequency with which you clean the outlet cleaning considering the
hours of operation, thus avoiding ash saturation.
Once you clean the walls of the stove, you must be sure that the cleaning outlet is securely closed, since the
proper operation of the stove depends on this cleaning.
5.9. Cleaning of the gas outlet circuit. Always with the boiler disconnected. (Very important).
For an optimal cleaning of the extractor's collector, it is recommended to dismantle the extractor itself in
order to have full access to this zone for a better cleaning. Once the extractor is dismantled, clean it with a
dry brush and be careful with the turbine and structure.
When reassembling the exhaust it is COMPULSORY to replace the exhaust joint with a new one as you run
the risk of gas entering in our home.

Gas outlet extractor.

Ceramic fiber joint (replace).
5.10. Dismantling and cleaning of gas outlet pipes.
When mounting the gas outlet pipeline, make sure it is well assembled, preferably sealed with silicone. If the
pipe has sealing joints, you must verify its good condition and replace it if necessary.
5.11. Lubrication of the screw and spring of the gas security valve. It is placed in the right side of the boiler, just
above the cleaning outlet.

Lubrication point.
5.12. Empty the hopper to take remaining pellets out to avoid pellets absorb humidity.
38
Drawing 17
Drawing 18
Drawing 19