ECOFOREST CANTINA SUPER Manual De Instalación Y Mantenimiento página 35


Stainless steel hose clamp.

T of 90° with outlet.

Wooden ground.

Non flammable floor protection.

Isolated stainless steel flexible tube.

Rigid flexible pole adapter.

Minimum 200mm.

It must exceed roof height by 1 metre.
If the tube over 8 m in length, the next larger

size will be used.
4.28. Installing a fitted stove in a brickwork chimney can be done using flexible piping in its entirety, as indicated in
drawing 9. We must take special care when sealing the chimney and gas venting to avoid gas blowing back
during storms.

Stainless steel hose clamp.

T of 90° with outlet.

Wooden ground.

Non flammable floor protection.

Stainless steel flexible tube.

Rigid flexible pole adapter.

Anti blow-back seal.

Minimum 200mm.

It must exceed roof height by 1 metre.
If the tube over 8 m in length, the next larger

size will be used.
When installing a flexible tube for gas outlet, be careful that this is not in contact or close to the circuit board
or combustible material.
The steam trap can be found when opening the right door, on the left top part; open it until water falls down.
An Ecoforest box is placed inside the fireplace. It contains the user manual, the installation and maintenance
manual, a keyboard and keyboard support, a WiFi antenna, a power cable, a room sensor and a cleaning brush. The
keyboard must be mounted with its holder.
HEATING SYSTEM DRAINING (VERY IMPORTANT).
POWER CABLE, ROOM SENSOR AND WiFi ANTENNA CONNECTION.
34
Drawing 8
Drawing 9