Petsafe PBC17-13465 Manual De Funcionamiento página 10

The Bark Control Collar has a single Settings Button that allows you to turn the unit on
and off, display or change the current static stimulation mode, and change the static
stimulation level. The following table describes how to perform the different tasks.
Task
Turn the
unit on
Turn the
unit off
Display
current static
stimulation
mode
Change
active static
stimulation
mode
* If you continue to hold the Settings Button for more than 5 seconds, you will begin
changing the static stimulation mode. You must release the Settings Button before
attempting to turn off the unit.
** The light will fl ash every fi ve seconds to indicate the current mode.
10
Steps to perform
Press and release the
Settings Button while the
unit is off.
Press the Settings Button
until the Digital Display
goes blank and the red
light appears. Release the
Settings Button.*
Press and hold the Settings
Button for less than 2
seconds before releasing it.
1. Press and hold the
Settings Button for at
least 5 seconds.
2. Continue to hold the
Settings Button to
advance to the next
available mode.
3. When the desired mode
is displayed, release the
Settings Button.
4. Once the Settings Button
has been released for
5 seconds, the new
static stimulation mode
will activate.
5. If the Settings Button
is released too early,
simply press it again
within 5 seconds.
www.petsafe.net
Indications
The light will fl ash green fi ve
times and then display the
current static stimulation mode.
The light will fl ash red four times
and the unit will turn off.
The unit will display the current
static stimulation mode and
battery condition.
Mode will advance and
be displayed.
Every 2 seconds the mode will
advance and be displayed.
The selected mode will be
displayed during this time.
The Digital Display will fl ash four
times and the unit will resume
normal operation using the new
static stimulation mode.**
The mode will advance and
continue as described in Step 2.