Checking Speaker Systems - Promax PE-005 Manual Del Usuario

4.1.2 Checking speaker systems

1. A drawing of the system should be made before testing so the measurement can be
attributed to network.
2. By example, the following setup shows a speaker system of 260 W using a 100 V
voltage line.
Z = V
3. Estimated impedance value should be:
4. If Z measured is lower, check for short circuited wires or faulty speakers or
transformers.
5. If Z measured is higher, check for wiring or components (speakers, transformers or
connections).
Page 8
/ P = 10000 / (10 + 50 + 200) = 38.46 Ω
2 2
/ P = 100
Z = V
/ P = 10000 / (10 + 50 + 200) = 38,46 Ω
2
Z = 100
USER'S MANUAL. PE-005
(10 W)
(50 W)
(200 W)
2
/ P
11/2014