Idiomas disponibles
Idiomas disponibles
X10 HOME ENTERTAINMENT
POWERMID
This kit allows you to control remotely any A/V distant
appliance, TV, VCR, Hi-Fi, satellite and cable box, just by using
your existing remote control! The remote control signal is
transmitted through walls and ceilings, up to 30 meters away.
Conformity of use
The PowerMid must be used inside only. Avoid humidity or
extreme temperatures.
Disconnect the unit during thunderstorms from mains and other
connected equipment to avoid damage.
Caution: To reduce risk of electric shock, do not disassemble
any part of the video sender system. No user-serviceable parts
are inside. If you spill liquid on it, disconnect the unit from the
mains outlet to prevent possible fire or shock hazard and
consult authorized service personnel. Use only the supplied
power supplies.
Defective parts must be replaced by original spare parts only
and repairs must be done by authorized service personnel. No
guarantee or liability will be accepted for any damage caused
due to incorrect use of the equipment supplied, other than
indicated in this owner's manual.
Transmission of your original remote control signals
Point your original remote control at the PowerMid Transmitter
(ST10). As soon as you press a button, the transmitter captures
the IR command, converts it into a RF message, and transmits
it through the walls to the PowerMid Receiver (RE10). This unit
converts the signal into an IR message back, in order to control
the selected A/V source. For example, you can change
channels on your satellite receiver while viewing it in another
room. The remote control signal is transmitted through walls
and ceilings, up to 30 meters away.
P/N 33000H13069B
3
BMB HOME Rev. 01-03-06
